emulatorII-list

Hello!

I will revive this thread because I have exactly the same problem described here.

The only difference is that I my newly purchased DPX has OS 2.2.

About functions of the DPX:

- I can format diskettes and save RAM content onto them
- I can load diskettes in Prophet 2000, Mirage and EII format

About functions of my PC:

- I can run DPXTOOLS, I get no error message, all procedures are completed (apparently) successfully but the DPX doesn't read diskettes made with the computer and says nF if I insert in the DPX a diskette I formatted with the PC

- I can successfully format and write EMAX diskettes, my EMAX will load then without problems

In the PC I installed the Fdrawcmd driver and the disk drive is internal (no USB) and it works with EMXP for EMAX.

I would really appreciate if someone could help me sorting out this issue.

Many thanks!

Edo





--- In emulatorII-list@yahoogroups.com, "christian.schwank" <c.schwank@...> wrote:
>
> --- In emulatorII-list@yahoogroups.com, "esynthesist" <esynthesist@> wrote:
> 
> Hi,
> i have installed the driver, yes.. and rebooted for safty.
> I am using a standard floppy a: as internal drive.
> the error message is:
> 
> ERROR: 11: Writing sectors was not successful. 27.
> 
> My DPX-1 is OS 1.3
> 
> EDIT:
> DPXWrite works after formating with yout DPXFormat Tool.
> The Error Message only comes, when i try to PDXWrite on a disk,
> which was formated in the Oberheim.
> 
> ok, writing works so far, but when i put the disk in the
> DPX and press Load, the "dE" Errormessage comes up.
> File was copied with the .img ending. Hope the is correct.
> 
> Any hints? 
> 
> 
> > What error do you get from DPXWRITE ?
> > Did you install the required floppy driver first (fdrawcmd) ?
> > Are you using an internal floppy drive (non-USB that is...) ?
> > 
> > ///E-Synthesist
> > 
> > --- In emulatorII-list@yahoogroups.com, "christian.schwank" <c.schwank@> wrote:
> > >
> > > Hi,
> > > 
> > > I translated an .EII File with the DPXTools Software
> > > into the DPX Image Data.
> > > 
> > > Size goes up from 475kb to 880kb!
> > > 
> > > My Floppy Disks only have 720 kb Space.
> > > I also formated them in the DPX.
> > > But DPXWrite come up with an error message, when i
> > > try to copy the translated data.
> > > 
> > > How do I get the 880b onto a floppy disk,
> > > or am i using the wrong type of disks?
> > > 
> > > Christian
> > >
> >
>