emulatorII-list

Which adapter did you use, pulsemod ?




--- In emulatorII-list@yahoogroups.com, "pulsemod" <dblondin@...> wrote:
>
> 
> I like how tight and simple looking the drive adapter looks. Here's the
> way I have it for the time being:
> 
> http://www.dblondin.com/Pickup/e2.jpg
> 
> --- In emulatorII-list@yahoogroups.com, "Gil" <gilwe@> wrote:
> >
> > Very nice E-II, wniessen !
> >
> >
> >
> > --- In emulatorII-list@yahoogroups.com, w.niessen@ wrote:
> > >
> > > Yes, my housing is also 1mm to big, but I fixit.
> > > I'm in contact with Lotharek (HxC) an as I told, he will fix it in a
> > > view Weeks.
> > >
> > > See my EII...
> > >
> http://groups.yahoo.com/group/emulatorII-list/photos/album/851025785/pic\
> /1583755027/view?picmode=&mode=tn&order=ordinal&start=1&count=20&dir=asc
> > >
> > >
> > > Am 28.10.2012 um 03:34 schrieb dblondin@:
> > >
> > > > I have it installed in the top drive bay of an EII with a switch
> that
> > > > allows me to select between the two drives. The HxC is simple,
> > > > convenient,
> > > > and powerful. And the software works pretty good too - a little
> > > > buggy but
> > > > it's getting some good updates.
> > > >
> > > > Same problem here with the screw holes not lining up. Also the
> > > > housing of
> > > > the HxC is not threaded - actually it's too thin to be threaded.
> So
> > > > the
> > > > only way I could secure it to the drive bay adapter was to use
> self
> > > > threading screws or small screws with nuts. I ended up drilling
> new
> > > > holes
> > > > in the drive adapter to fit the hole alignment of the HxC and also
> I
> > > > used
> > > > over-sized screws that seem to hold it securely in place.
> > > >
> > > > My first test - I found some EII banks on line and used the HxC
> > > > software
> > > > to batch convert them to the HxC format with just a couple of
> clicks.
> > > > Dropped those files onto and SD card and in 5 minutes I've got
> this
> > > > little
> > > > SD card that's loaded with some wonderful Universe of Sounds banks
> and
> > > > loads - I should say unlimited - room to spare. And no legacy
> computer
> > > > gear or software needed to get the sounds installed.
> > > >
> > > > Screw hole problem aside I'm very happy with it.
> > > >
> > > >
> > > >> 3,5" to 5,25" Adapter
> > > >>
> http://www.delock.com/produkte/F_367_Einbaurahmen_18136/merkmale.html
> > > >>
> > > >>
> > > >> Am 27.10.2012 um 22:25 schrieb Gil:
> > > >>
> > > >>> What adapter did you use ? can you send a link ? ;)
> > > >>>
> > > >>>
> > > >>>
> > > >>>
> > > >>> --- In emulatorII-list@yahoogroups.com, w.niessen@ wrote:
> > > >>>>
> > > >>>> Yes, me :-)
> > > >>>>
> > > >>>> I have it and its fine. The only problem is the Screwholes will
> not
> > > >>>> fit perfekt to a 3,5 to 5,25 Adapter Frame.
> > > >>>> He says he will fix these in a view Weeks.
> > > >>>>
> > > >>>>
> > > >>>> Am 27.10.2012 um 21:30 schrieb Gil:
> > > >>>>
> > > >>>>> There were some talks a while ago about the new Rev. F of
> > > >>>>> Lotharec's
> > > >>>>> floppy emulator. Has anyone installed it in their E-II ? Any
> > > >>>>> impressions ?
> > > >>>>>
> > > >>>>>
> > > >>>>> http://www.lotharek.pl/product.php?pid=42
> > > >>>>>
> > > >>>>>
> > > >>>>>
> > > >>>>> ------------------------------------
> > > >>>>>
> > > >>>>> Yahoo! Groups Links
> > > >>>>>
> > > >>>>>
> > > >>>>>
> > > >>>>
> > > >>>
> > > >>>
> > > >>>
> > > >>>
> > > >>> ------------------------------------
> > > >>>
> > > >>> Yahoo! Groups Links
> > > >>>
> > > >>>
> > > >>>
> > > >>
> > > >>
> > > >
> > > >
> > > >
> > > >
> > > > ------------------------------------
> > > >
> > > > Yahoo! Groups Links
> > > >
> > > >
> > > >
> > >
> >
>