emulatorII-list

I like how tight and simple looking the drive adapter looks. Here's the
way I have it for the time being:

http://www.dblondin.com/Pickup/e2.jpg

--- In emulatorII-list@yahoogroups.com, "Gil" <gilwe@...> wrote:
>
> Very nice E-II, wniessen !
>
>
>
> --- In emulatorII-list@yahoogroups.com, w.niessen@ wrote:
> >
> > Yes, my housing is also 1mm to big, but I fixit.
> > I'm in contact with Lotharek (HxC) an as I told, he will fix it in a
> > view Weeks.
> >
> > See my EII...
> >
http://groups.yahoo.com/group/emulatorII-list/photos/album/851025785/pic\
/1583755027/view?picmode=&mode=tn&order=ordinal&start=1&count=20&dir=asc
> >
> >
> > Am 28.10.2012 um 03:34 schrieb dblondin@:
> >
> > > I have it installed in the top drive bay of an EII with a switch
that
> > > allows me to select between the two drives. The HxC is simple,
> > > convenient,
> > > and powerful. And the software works pretty good too - a little
> > > buggy but
> > > it's getting some good updates.
> > >
> > > Same problem here with the screw holes not lining up. Also the
> > > housing of
> > > the HxC is not threaded - actually it's too thin to be threaded.
So
> > > the
> > > only way I could secure it to the drive bay adapter was to use
self
> > > threading screws or small screws with nuts. I ended up drilling
new
> > > holes
> > > in the drive adapter to fit the hole alignment of the HxC and also
I
> > > used
> > > over-sized screws that seem to hold it securely in place.
> > >
> > > My first test - I found some EII banks on line and used the HxC
> > > software
> > > to batch convert them to the HxC format with just a couple of
clicks.
> > > Dropped those files onto and SD card and in 5 minutes I've got
this
> > > little
> > > SD card that's loaded with some wonderful Universe of Sounds banks
and
> > > loads - I should say unlimited - room to spare. And no legacy
computer
> > > gear or software needed to get the sounds installed.
> > >
> > > Screw hole problem aside I'm very happy with it.
> > >
> > >
> > >> 3,5" to 5,25" Adapter
> > >>
http://www.delock.com/produkte/F_367_Einbaurahmen_18136/merkmale.html
> > >>
> > >>
> > >> Am 27.10.2012 um 22:25 schrieb Gil:
> > >>
> > >>> What adapter did you use ? can you send a link ? ;)
> > >>>
> > >>>
> > >>>
> > >>>
> > >>> --- In emulatorII-list@yahoogroups.com, w.niessen@ wrote:
> > >>>>
> > >>>> Yes, me :-)
> > >>>>
> > >>>> I have it and its fine. The only problem is the Screwholes will
not
> > >>>> fit perfekt to a 3,5 to 5,25 Adapter Frame.
> > >>>> He says he will fix these in a view Weeks.
> > >>>>
> > >>>>
> > >>>> Am 27.10.2012 um 21:30 schrieb Gil:
> > >>>>
> > >>>>> There were some talks a while ago about the new Rev. F of
> > >>>>> Lotharec's
> > >>>>> floppy emulator. Has anyone installed it in their E-II ? Any
> > >>>>> impressions ?
> > >>>>>
> > >>>>>
> > >>>>> http://www.lotharek.pl/product.php?pid=42
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>> ------------------------------------
> > >>>>>
> > >>>>> Yahoo! Groups Links
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>
> > >>>
> > >>>
> > >>>
> > >>>
> > >>> ------------------------------------
> > >>>
> > >>> Yahoo! Groups Links
> > >>>
> > >>>
> > >>>
> > >>
> > >>
> > >
> > >
> > >
> > >
> > > ------------------------------------
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> >
>