emulatorII-list

wow cool, thanks a lot now i ve 2 EII : )

----------
> Von: Rob Keeble <rob@...>
> An: emulatorII-list@yahoogroups.com
> Betreff: RE: [emulatorII-list] Midi Supermode ????
> Datum: Samstag, 2. Juni 2001 13:26
> 
> Hi,
> 
> Here is how it works...
> 
> Rob
> 
> The Emulator Archive
> www.emulatorarchive.com
> 
> 
> Sub-module:	SEQUENCER DEFINE 4
> 
> Function:	SUPERMODE
> 
> This function allows the E2 to receive MIDI Information over 8 dIfferent
> channels, and sound them through 8 dIfferent presets simultaneously! To
use
> Supermode, you must first create a Supermode map which routes the MIDI
> channels to specific presets.
> 
> To create the Supermode map:
> 
> 1. Define a new sequence and record a short, blank sequence of any length
> (don\ufffdt play any notes). Each track you record listens to 2 MID! channels.
> Track 1 listens to MID! channels 1 and 9, track 2 listens to channels 2
and
> 10, track 3 to channels 3 and 11, and so on. Repeat the blank recording
> process on any track whose MIDI channels you wish to use.
> 
> 2. Activate the EDIT module and select 5 (REASSIGN PRESET). Assign each
> track to the desired preset. You now have a Supermode map that you can
copy
> to other sequencer locations. By simply changing sequences, you can call
up
> a new map!
> 
> To use the Supermode map:
> 
> 3. Check that the E2\ufffds MIDI IN connects to the external sequencer\ufffds MIDI
> OUT.
> 
> 4. Make sure that the current preset is in OMNI mode (PRESET DEFINITION
30)
> and turn it\ufffds sequencer START/STOP setting to off.
> 
> 5. Activate the DEFINE module and select 4. The display says:
Supermode:NO
> Press Y/N
> 
> Press ON to enable Supermode. The E2 will now respond to multiple MIDI
> channels and route them to the preset specified In the Supermode map.
> Supermode is only active while the E2 sequencer module is active.
> 
> Notes on E2 Supermode.
> 
> Supermode is off when the E2 Sequencer is running.
> Realtime controller data Is not received over Supermode. Sending realtime
> controller data to the E2 while in Supermode will slow the MIDI response
by
> clogging the MIDI input.
> While In Supermode; Sustain Information on any MlDl channel will affect
the
> Current Preset.
> While in Supermode on Hard Disk units; MIDI Preset Change commands 53-99
on
> any MIDI channel will cause a Hard Disk bank to be loaded unless Preset
> Change (in the Current Preset MIDI menu) is set to OFF.
> 
> SUPEERMODE MAP EXAMPLE
> 	E2 PRESETS		05	01	02	10	06	21	15	04
> 	E2 TRACKS		1	2	3	4	5	6	7	8
> 	MIDI CHANNELS	1	2	3	4	5	6	7	8
> 
> 
> To unsubscribe from this group, send an email to:
> emulatorII-list-unsubscribe@yahoogroups.com
> 
>  
> 
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

>