emulatorII-list

OK, maybe the basic questions now:
- is the Emulator-II in MIDI mode (not OFF)?
- did you also try the communication after setting the Emulator-II manually in "Mac mode" ?
- are you sure you are using the COM port corresponding to the EmuSer (Windows sometimes has a problem resulting in using the same COM port for different devices, including internal virtual com ports) ? What COM port number are you using ?
- are you sure you have installed the USB serial driver for the EmuSer ?
- is the EmuSer "transmit" LED reacting when attempting to set up communication with the Emulator-II ?
- what are the (DC) voltage levels of the E-II DB25 pins (1) when not connected to the EmuSer, (2) when connected to the EmuSer ?

If everything seems still OK, I can send you an (archaic) terminal software for use with the EmuSer which can help us in a more detailed investigation of how the E-II reacts on individual instructions.

///E-Synthesist  

--- In emulatorII-list@yahoogroups.com, Yahoo Auctions <yahoo_auc@...> wrote:
>
> Thank you for all the answers.
> I have no Mac nor Sound Designer to try it out.
> I replaced IC108 and IC132 with new CIs but still no luck.
> I checked all voltages at the DB25 pins and they seem OK.
> I checked my EMuSer and it seems OK.
> Also I built another one yesterday and it does not work either.
> I will work on it again tomorrow but in the mean time if someone has an 
> idea it will be much appreciated.
> 
> Best,
> OT
> 
> Adrien wrote:
> 
> >
> >
> > Did you try already your emu II with sound designer for emu ? did it 
> > work ?
> >
> > If so I guess it should work with the emuser too …
> >
> > Patiene you'll get to it, it's a very cool box !
> >
> > ------------------------------------------------------------------------
> >
> > *De :* emulatorII-list@yahoogroups.com 
> > [mailto:emulatorII-list@yahoogroups.com] *De la part de* c_janot
> > *Envoyé :* vendredi 2 mars 2012 10:27
> > *À :* emulatorII-list@yahoogroups.com
> > *Objet :* [emulatorII-list] Re: EMXP error codes
> >
> > Hi CEM,
> >
> > The schematics are right. I double check on a motherboard image. So :
> > IC108 : 26LS32
> > IC132 : 26LS31
> >
> > Christophe
> >
> > --- In emulatorII-list@yahoogroups.com 
> > <mailto:emulatorII-list%40yahoogroups.com>, Yahoo Auctions 
> > <yahoo_auc@> wrote:
> >>
> >> Hi,
> >>
> >> Thank you for the infos.
> >> I know that I should check out my EmuSer and EII but I expected to get
> >> some clue where to look at if I knew the meaning of thoses error codes.
> >> Anyway, I had a look inside the EII (w/ rev.1 board) and I found
> >> something wrong.
> >> According to the EII schematics, IC108 should be 26LS32 and IC132, 
> > 26LS31.
> >> In my EII it was the opposite.
> >> I swapped the IC's but it does not work either.
> >> Is there anyone who could confirm what is IC132 and IC108 ?
> >> In advance thank you.
> >>
> >> OT
> >
> >
> >
> >
>