emulatorII-list

Thank you for all the answers.
I have no Mac nor Sound Designer to try it out.
I replaced IC108 and IC132 with new CIs but still no luck.
I checked all voltages at the DB25 pins and they seem OK.
I checked my EMuSer and it seems OK.
Also I built another one yesterday and it does not work either.
I will work on it again tomorrow but in the mean time if someone has an 
idea it will be much appreciated.

Best,
OT

Adrien wrote:

>
>
> Did you try already your emu II with sound designer for emu ? did it 
> work ?
>
> If so I guess it should work with the emuser too \ufffd
>
> Patiene you\ufffdll get to it, it\ufffds a very cool box !
>
> ------------------------------------------------------------------------
>
> *De :* emulatorII-list@yahoogroups.com 
> [mailto:emulatorII-list@yahoogroups.com] *De la part de* c_janot
> *Envoy\ufffd :* vendredi 2 mars 2012 10:27
> *\ufffd :* emulatorII-list@yahoogroups.com
> *Objet :* [emulatorII-list] Re: EMXP error codes
>
> Hi CEM,
>
> The schematics are right. I double check on a motherboard image. So :
> IC108 : 26LS32
> IC132 : 26LS31
>
> Christophe
>
> --- In emulatorII-list@yahoogroups.com 
> <mailto:emulatorII-list%40yahoogroups.com>, Yahoo Auctions 
> <yahoo_auc@...> wrote:
>>
>> Hi,
>>
>> Thank you for the infos.
>> I know that I should check out my EmuSer and EII but I expected to get
>> some clue where to look at if I knew the meaning of thoses error codes.
>> Anyway, I had a look inside the EII (w/ rev.1 board) and I found
>> something wrong.
>> According to the EII schematics, IC108 should be 26LS32 and IC132, 
> 26LS31.
>> In my EII it was the opposite.
>> I swapped the IC's but it does not work either.
>> Is there anyone who could confirm what is IC132 and IC108 ?
>> In advance thank you.
>>
>> OT
>
>
>
>