emulatorII-list

Hi,

Thank you for the infos.
I know that I should check out my EmuSer and EII but I expected to get 
some clue where to look at if I knew the meaning of thoses error codes.
Anyway, I had a look inside the EII (w/ rev.1 board) and I found 
something wrong.
According to the EII schematics, IC108 should be 26LS32 and IC132, 26LS31.
In my EII it was the opposite.
I swapped the IC's but it does not work either.
Is there anyone who could confirm what is IC132 and IC108 ?
In advance thank you.

OT


esynthesist wrote:

>Both errorcodes mean that the communication between PC and EII failed.
>The reason code indicates that the maximum number of "init" instructions has been reached (this parameter can be set in the Preferences menu, but by default it's already pretty high so increasing it doesn't make sense)
>The "init" instruction is required to start up (or restart) the communication.
>So basically it means that the communication can not be set up.
>
>Are you sure the RS422 port works on the EII ? (e.g. does it work with a Mac and SoundDesigner if you happen to own these ?)
>If yes, then there's a big chance something is wrong in the EmuSer that you have built. Did you build exactly the same circuit with the same components as in the construction manual ?
>Did you check for possible shortcuts or failing components ?
>Is the firmware installed correctly ?
>
>I will try to add some more explanatory text in the error messages of EMXP in future versions (step by step...).
>You can also ask for support by e-mail instead of using the group message boards.  
>
>///E-Synthesist
>
>--- In emulatorII-list@yahoogroups.com, "dupont jean" <yahoo_auc@...> wrote:
>  
>
>>Hi all,
>>
>>New around here and already need some help...
>>
>>I just built a EmuSer.
>>I tried to send banks from EMXP to my EII and it does not work.
>>I get the following error message:
>>Errorcode 1007
>>....Reasoncode is 3.
>>
>>I also tried to receive a bank from the EII to EMXP and it did not work either.
>>But the error message was different:
>>Errorcode 990
>>....Reasoncode is 3.
>>
>>Does someone know what the Errorcodes and Reasoncode mean ?
>>
>>Thanks
>>OT
>>
>>    
>>
>
>
>
>
>------------------------------------
>
>Yahoo! Groups Links
>
>
>
>
>
>  
>