emulatorII-list

I swapped them freely on a couple of units I'm working on. The analog boards are the same. The only caveat I can think of is that the non-modified Rev.0 has an RS232 port, and they updated it on Rev 1 to RS422 for Sound Designer/Mac support.

--- In emulatorII-list@yahoogroups.com, Ryan Supak <ryansupak@...> wrote:
>
> I don't know the answer to this question but I suspect it's OK.
> 
> The Service Manual has a detailed description of revision
> differences/kludges as well. So you might be able to ascertain it from
> there. If you do try it and succeed I'd like to know.
> 
> rs
> On Thu, Jan 5, 2012 at 5:38 PM, trickstar303 <trickstar303@...> wrote:
> 
> > **
> >
> >
> > Is it possible to freely swap out the logic boards between Rev.0 and Rev.1
> > EIIs or are there differences on the analog boards between the different
> > revisions as well?
> >
> > George
> >
> >  
> >
>