emulatorII-list

>>> Should i soldering the cable by numbers
Of course... what else would you do ? :-)

>>> Is it true that i have to get a new cabel with 8 cable?
No. You can keep the 6-wire cable, bacause the EII only uses 6 wires on its RS422 port. Pin 1 and pin 7 of the miniDIN cable must not be used.
(the document says that pin 1 should be connected to pin 20 of the EII DB25 connector, but this is the clock out pin of the Mac and it is not being used by the EII, so you can ignore it)



--- In emulatorII-list@yahoogroups.com, "Wolfgang Krell" <wolfgangkrell@...> wrote:
>
> Hi there! Question about sd cabel.  i was opening my normal mac conection cabel there where only 6 cable but the mini din cabel in the describtion has 8. Is it true that i have to get a new cabel with 8 cable? In the describtion is the pin position rom the din on the left and the e2 on the right side. Should i soldering the cable by numbers? Thanks!;)
>