emulatorII-list

hello hello! thx for quick response!!;) ok i bought 2 of them today in a shop! if i have them may i start testing it and as fast if i can i will tell you all the result! greetz wolfgang ps: tomorow i will remove the sticker from the original ic and than i tell it here!!   

--- In emulatorII-list@yahoogroups.com, "zomnius@..." <zomnius@...> wrote:
>
> ye you can replace N Ms with C mos. difference is less power consuming... (green green world ;)
> 
> --- In emulatorII-list@yahoogroups.com, "esynthesist" <esynthesist@> wrote:
> >
> > The EII originally used 2764 N-MOS 64kb eproms; finding those unused or NOS is hard nowadays.
> > As far as I can see from the specs, C-MOS variants (27C64) can be used too in the E-II. 
> > Co-member djlitwin once reported that he was able to use a Fujitsu N-MOS 2764 eprom with 200 ns access time as a replacement for his original Hitachi 2764 eprom. The original one was 300 ns I think (see files section: the txt file in the technical->roms folder)
> > 
> > The ST 27C64 eprom suggested by Wolgang seems OK to me from specs point of view. Of course the programming must be done with different voltage levels, but the operational characteristics seem compatible (including access time and TTL input compatibility)...
> > 
> > But Wolfgang will be able to give us the final confirmation, right ? :-)
> > 
> > 
> > --- In emulatorII-list@yahoogroups.com, "zomnius@" <zomnius@> wrote:
> > >
> > > Hello wolfgang,
> > > 
> > > what does the original eprom shows? (type name)
> > > 
> > > sems the one you found is an UV CMos eprom allright.
> > > 
> > > cheers Zom
> > > 
> > > 
> > > --- In emulatorII-list@yahoogroups.com, "Wolfgang Krell" <wolfgangkrell@> wrote:
> > > >
> > > > hi iam new here and iam looking for the right eprom ic to burn the scanner v3.1 version on the chip. in the internet i found one but i dont know if this one is working. is the following typ the right one? thx for quick response!
> > > > 
> > > > 
> > > > Typ 	M 27 C 64 A-20 F1
> > > >  	FDIP 28 W
> > > >  	64 kBit
> > > >  	8 K x 8
> > > >  	200 ns
> > > >  	STM
> > > > RoHS-konform 	yes
> > > > Ausführung 	CMOS UV
> > > > TOP 	        0 - +70 °C
> > > >
> > >
> >
>