emulatorII-list

Thanks !! You help me a lot.

ok I guess you meant 
R109 : 42,1 Kohm (not ohms) as the Resistor is 100K.

I can now turn it up safely I guess ;)

I will also document these values for other, when coming across the same issue.



--- In emulatorII-list@yahoogroups.com, zom <zomnius@...> wrote:
>
> Hello,
> 
> I am measuring
> 
> R110 : 1,39ohm (measured at 20k ohm range)
> 
> R109 : 42,1ohm (measured at 200k ohm range)
> 
> cheers Zom
> 
> 
> 2011/8/8 zom <zomnius@...>
> 
> > I will do this now for U.
> >
> >
> >
> > 2011/8/8 Gil <gilwe@...>
> >
> >> **
> >>
> >>
> >> Hello friends.
> >>
> >> As I posted before, I have a little trouble with my E-II. I recapped the
> >> power supply, and mistakenly tweaked the two trimpots marked R109 and R110,
> >> both appearing on the right side of the power supply circuit. It appears
> >> there is not calibration procedure for them available, so the only way I can
> >> set them back to their "factory" positions is to get the values from another
> >> E-II... Will any of you be kind enough to measure these two trimpots in his
> >> E-II and let me know the values across their legs (as set in the factory) ?
> >> this way I will be able to set them back to where they should be, and make
> >> use of my E-II again....
> >>
> >> Thanks very much for the help !!
> >>
> >>  
> >>
> >
> >
>