hey greg!
i ´can´t help you, but if you want to repair it, i can give you a REALLY good and cheap adress for repair in vienna!!!
depends on where you are from...
cheers - simon
----- Original Message -----
From: grkh2003
To: emulatorII-list@yahoogroups.com
Sent: Thursday, September 04, 2003 9:55 PM
Subject: [emulatorII-list] A several problems with EII
Hi everybody!
It's nice to be a member of this forum!
I've just obtained my first Emulator II. It is model 6028 (2
floppies, no HD, not "+" model)
And I have the following 3 problems:
1. The sampling input doesn't pass the incoming signal,
but if I gain it as +40 db using internal amp of EII (Sample module -
gain set)- I can hear the incoming signal very very quiet.
The "Gain" knob makes no difference at all.
2. When I turn my EII on, it tells "Emulator 2 Boot in progress" and
then it freezes! In order to make EII working, I should try to turn
it on and then off for several times - then it successfully asks for
the disk - and seems working ok, except the problem 3:
3. I loaded a presets from the disk, but when I starting to play
them, the sounds became more and more distorted down to the
full silence...
I suspect that the problems 2&3 can be due to the bad internal power
supply. Am I right here or there can me anything else?
It will be great, if someone can help me with it. Any advice will be
kindly appreciated! Thank you very much!
Grigory
Yahoo! Groups Sponsor
ADVERTISEMENT
To unsubscribe from this group, send an email to:
emulatorII-list-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]Message
Re: [emulatorII-list] A several problems with EII
2003-09-05 by Simon Wotton
Attachments
- No local attachments were found for this message.