emulatorII-list

Hi,
The two SSM2044 filters can be adjusted only in hardware, they are not
accessible via the SP-12 Operating System. You can play with trimmers RT5
and RT6 on the main PCB or replace the resistors if you are into electronics
and know how the SSM2044 is set up. This is really a service tech job and we
don't recommend users play around with these settings/trimmers.

Regards
rob
www.emulatorarchive.com

  -----Original Message-----
  From: the_emulatorii [mailto:simonabsent@...]
  Sent: 01 August 2003 22:01
  To: emulatorII-list@yahoogroups.com
  Subject: [emulatorII-list] dynamic filters on SP12?


  hi all!!!

  on the emulator-archive i read about dynamic filters on the SP12 -
  it is said, that two of the filters can be internelly ajusted!!!
  how can i adjust them? - which menu must i use to manipulate them?

  thanx in advance -
  here the text, copied from the emulator-archive:

  "Yes, the SP-12 has analog filters !

  Two of the channels the ride/crash and hit hats are unfiltered.

  Four others (snare/rim, bass, claps. cowbell) are each filtered with
  a static five pole 1dB Chebyshev filter, set at frequencies to
  optimise the sounds.

  The remaining two channels (the toms) each use a dynamic VCF. They
  use the SSM2044 with a simple AR enevelope  generated by the Z80.
  They create a 5ms sloping attack, followed by a decay. The
  frequencies can be internally adjusted."


        Yahoo! Groups Sponsor
              ADVERTISEMENT




  To unsubscribe from this group, send an email to:
  emulatorII-list-unsubscribe@yahoogroups.com



  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]