emulatorII-list

This means that the "slow" communication at 31.25 kbaud is working, 
but the "fast" one at 500 kbaud is not. The fact that the drive is 
activated for a short while is just for loading the OS module for 
RS422 communication.
It's typical behaviour for a Mac which doesn't support this 500 kbaud 
communication.
In the database of hardware compatibility the Classic II is not 
mentioned as compatible, and if I remember well other people 
complained about this machine before.
An original Classic will do the job... 

///E-Synthesist
--- In emulatorII-list@yahoogroups.com, "mrjdevries" <mrjdevries@...> 
wrote:
>
> Sorry if this is getting boring for those who read this, but I have 
> some updates.
> 
> Firstly, My EII is a REV 0, but it has been upgraded, and can 
> communicate with my MAC IIsi fine.. But to be honest, I'd prefer 
> using my MAC Classic II as it's, well, more compact.
> 
> I re-formatted my mac classic II with a nice fresh install of OS 
> 7.0.1 so there should be minimal conflict issues.
> (I'll post up a walk through for others of how to do this soon + 
> OS.7.0.1 files [the ones from the mac site seemed corrupt])
> 
> When using SD with my EII, I can play it remotely with the onscreen 
> computer keyboard etc (So comms are kinda working) but when I try 
and 
> do anything like sending or receiving a bank etc, the EII's drive 
> whirs for a bit, then the EII locks up with a message "Under 
Control 
> of MAC" and no button pressing etc will free it up.
> The mac flashes up the error "Can't control with Emulator II ..."
> 
> I've tried both ports (Printer & Modem)
> I've tried turning apple talk off & on, still no luck
> Virtual memory is off. (I've tried with it on as well)
> 32bit mode is off (I've tried with it on too)
> 
> Any other options etc?
> 
> Thanks for your help
> Regards
> Mike
>