emulatorII-list

--- In emulatorII-list@yahoogroups.com, "jmp701" <jmp70@...> wrote:
>
> Hi. I've spent some time recently getting my head around this 
> program and soundbank transfers to EII etc. but to date have been 
> unable to communicate with the E2 using the program installed on a 
> Powerbook 150. I know this isn't listed as compatible in the 
> database so I have a Mac SE on the way which I hope to have more 
> success with. 

The compatibility database isnt a complete nor final list of the only
Macs that work. It is just a list of known working configurations that
have been verified personally by our members. 

The only important difference I can see between a Powerbook 165c/180c
(which both work with SD) and the Powerbook 150; is that the 165c/180c
have both modem *and* printer ports, while the 150 only has a single
printer port. If you notice in the database, both working Powerbooks
are using the modem port (which the 150 apparently doesnt have).

What Mac OS (system version) are you running and did you make sure
AppleTalk is turned ON? Are you sure your SD cable is wired correctly?
Even though it seems the Powerbook 150 only has a single printer port,
have you tried toggling the printer/modem port selection within Sound
Designer? I would think it has more to do with the E-II board revision
problem you mentioned, but youll know for sure when the Mac SE arrives. 

Someone else will need to give you the specifics on which E-II
hardware mods are necessary for SD as I dont know enough about that to
advise properly.