emulatorII-list

Hi Mike
There is the complete SD4E2 user manual in the file sections that explains
the software in detail. Also look at the troubleshotting guide too.
 
You need to connect the E2 and Mac using the special serial cable, switch on
the E2 and boot from OS3.1, than boot up the Mac and launch the SD4E2
software. Then use the software to read a sample bank on the CD and transfer
it to the E2. You'll need to be in the right software mode, and have the
software configured to point to the serial port you are using.
 
Regards
Rob


Hi all.....

I am now really frustrated, after finally getting my hands on an EII 
after many years - the Boot disc was wiped when it came through 
customs twice! - (bought from Australia!)

I am still waiting for a disc to come from the USA but there seems to 
be an issue with that too - has anybody got a disc in the UK that 
they can send to me - I can retuen a new blank floppy in exchange - 
so at least I know if it is working (as apparantly it was in Oz) or 
what I need to do to fix it!

I also have the leads and the CD Rom and SD floppy disc, can anybody 
tell me how I get the sounds off of the CD Rom? I know I need a Mac 
SE/30 etc for the model number but anything other than that Im at a 
loss.

I have had a look in the files section and see hints and tips for the 
SD software and usage butneed some help!

Thanks all!

Mike



 



[Non-text portions of this message have been removed]