I will give that a try and let you know if it works. ================================================== --- In emulatorII-list@yahoogroups.com, "hoschi1103" <totti@...> wrote: > > I've no EII at hand here on my job site, but if you start a diskcopy > on EII and exchange the source os disk with a service disk when the > display reads "start copy y/n" or whatever it was, it should copy the > service disk to the new disk. If not, you can read the disk with the > DIAG ROM into memory and write it back to an empty disk. I started > some conceptual work on a new DIAG ROM which would support direct disk > dump via serial using the z-protocol, but this will take a very long > time as I'm always busy with other things and the current DIAG ROM is > obviously mainly written from scratch, so needs some time to sort it > out. Anyhow, after optimizing the code, there should be about 3k free > for own extensions :-) > > Greetings, > Hoschi > > --- In emulatorII-list@yahoogroups.com, "magmusic75" john-m-junk@ > wrote: > > > > I have an original EII Service manual with the original service disk's > > i would like to find a way to copy them beacuse these are super hard to > > find. > > any info on this would be of great help. > > > > John > > >
Message
Re: How Can I Copy EII Service Disk's. ( Memory test / Scanner Test) ?
2008-08-14 by magmusic75
Attachments
- No local attachments were found for this message.