emulatorII-list

Hi mark 
I set the program to use 468k of memory as was the suggested size in
the info for the program rather tha 2468 as it was taking on auto.
cheers
Matt.


--- In emulatorII-list@yahoogroups.com, "muzicmd2000" <mlange@...> wrote:
>
> Congrats, Matt - reseating components is so often the ticket.
> 
> I couldn't find reference to setting the program's memory setting.  
> What did end-up using for SD? From "auto" to ???
> 
> Thanks,
> 
> Mark
> 
> --- In emulatorII-list@yahoogroups.com, "acidrockers1" 
> <acidrockers@> wrote:
> >
> > --- In emulatorII-list@yahoogroups.com, "Martin Dubka" <mdubka@> 
> wrote:
> > >
> > > I can't exactly diagnose your problem but I've had many problems
> > with my set-up and now 
> > > it's working so I'll just share my configuration so you can try 
> it.
> > > 
> > > Apple talk off
> > > Printer port selected within SD
> > > Mac > printer port > EII
> > > 
> > > From time to time I get the "I can't communicate" message but if I
> > try to send the bank 
> > > again straight away it works.
> > > Disconnect your midi cables while your still testing.  You can put
> > them back once 
> > > everything is working.
> > > Remember, these are stubborn, fickle old machines - sometimes if 
> you
> > just keep trying 
> > > they'll start working.
> > > 
> > > Lastly, count yourself lucky you don't have my set-up:  Oberheim
> > OBXa, Arp Odyssey, 
> > > Emulator II, Roland Juno 106.  They are the bane of my life and a
> > CONSTANT source of 
> > > problems.  That said, I would never exchange them for modern
> > equipment.  Even if some 
> > > days I feel more like a studio maintenance technician than a 
> musician!
> > > 
> > > Good luck,
> > > Martin
> > >
> > Hi Group.
> > Thanks for the advice chaps. I tried everything out that was 
> suggested
> > and none of it worked, so I opened up the eII and pushed all the 
> chips
> > back into the sockets on the main board, making a nice gravel crunch
> > sound as I did it. I booted everything up and we are working again.
> > Config is as follows.
> > Mac se system 7
> > EII+ ver 2.1
> > EII system 3.1
> > Using the modem port apple talk off.
> > And also set the memory for the program as it suggests, not the
> > maximum that is auto assigned.
> > thanks again.
> > Matt.
> >
>