emulatorII-list

Hmm .. It's newer than mine then (the first two digits (82 and 81) is the
year.).

Have you tried with floppies from another Emulator ?
Where in the world are you located ?

Kenneth
12bit.com 

-----Oprindelig meddelelse-----
Fra: emulatorII-list@yahoogroups.com
[mailto:emulatorII-list@yahoogroups.com] På vegne af umi4m
Sendt: 20. april 2008 19:57
Til: emulatorII-list@yahoogroups.com
Emne: Re: SV: [emulatorII-list] Re: Any Emulator I users in this group?

The version number of my 2708 EPROM is
820816.  

On Apr 20, 2008, at 9:42 AM, "Kenneth Abildgaard | OIIO" <kenneth@...>
wrote:

What’s the ROM version of your Emulator ?

You can see it on the EPROM chip located on the top right side of the
sampler.

The ROM version will look something similar to this 810928.

If it’s an old ROM version it may be unable to read any samples made on
another Emulator – it sounds to me as if this is your problem.

I have the old 810928 version and cannot read floppies made on another
Emulator – but fortunately mine came with 369 floppies. 

But let me know what version it is – and I’ll let you know if this is your
problem.

Kenneth

12bit.com

Fra: emulatorII-list@yahoogroups.com
[mailto:emulatorII-list@yahoogroups.com] På vegne af Mike de Vries
Sendt: 20. april 2008 16:28
Til: emulatorII-list@yahoogroups.com
Emne: Re: [emulatorII-list] Re: Any Emulator I users in this group?

No Pic attached.. Email me personally.

I'm pretty sure the disks are the same for all models. 2, 4 and 8 voice.

I'll take a snap of the inside of mine and see if that helps.

Regards

Mike

GG <umi4m@... <mailto:umi4m%40yahoo.com> > wrote:
Mike,

Still trying to get this E1 working:). I attached a
pic of what I understood should be the correct disk
drive jumper settings. Is this the same as what you
have? Now the LED comes on and if the drive is empty
it makes a noise like its doing a disk seek.
Unfortunately once I put a disk in the drive nothing
happens, all the LEDs stay lit thats about it. All the
disks that I have/bought are from a 8Voice model. I
bet I need a set of disks specific to the 4Voice.

--- Mike de Vries <mrjdevries@...
<mailto:mrjdevries%40yahoo.com.au> > wrote:

> How funny, I've just stuck a refurbished Shugart
> 400L in my Emulator1.. so I went through the whole
> jumpers thing.. (I stuck the jumpers off my old
> drive into the old one.)
> 
> This drive cost me $10 and worked perfectly!
> 
> Looking at the drive front on, from the disk entry
> side..
> 
> The IC mount with the jumpers is wired as follows
> 
> Connector SIDE
> 
> ------- this on is also (via a soldered wire)....
> -------
> -------
> -------
> -------
> ------- ....connected to this one!
> -- --
> 
> 
> DISK ENTRY SIDE
> 
> 
> Hope this Helps!
> 
> 
> Mike
> 
> 
> 
> GG <umi4m@... <mailto:umi4m%40yahoo.com> > wrote:
> Elm,
> 
> I had a similar type of encounter back in the early
> 90s, I bought this E1 from a group called Voice
> Farm,
> it came with all their samples:). It stopped working
> one day so I drove it up to EMu systems to no far
> from
> where I live. They put me in contact with Ed R. one
> of
> the original designers and they fixed it no charge! 
> Long story short, I sold that E1 a few years later,
> always regretted it. 
> 
> I just now got a 4 voice, with the disk drive
> removed. I found a replacement drive but lack two
> things:
> 
> 1. The drive mounting bracket. I will have to make
> my
> own and was hoping someone with a E1 could just send
> me a pic of how its mounted that would help me.
> 
> 2. The replacement drive has some jumpers on it and
> I
> was hoping someone with a working E1 could let me
> know
> what jumper settings they have on their drive.
> 
> If I get mine working I could send you a few disks
> if
> you still want them?
> 
> Thanks
> G 
> 
> --- elmbeatz <elmbeatz@... <mailto:elmbeatz%40hotmail.com> >
wrote:
> 
> > I bought mine in '91 without any disks.
> > Back in those days, E-Mu still was a company on
> > their own feet, and
> > they gave me support, as they sent me all software
> > that originally
> > came with the machine ( formatting, multisampling,
> > sequencing,
> > manual.... ). 
> > The thing worked as I tested it, but it worked
> very
> > very buggy. It's
> > an eight voice model. Unfortunately, I seem to
> have
> > lost all my disks
> > for it... 
> > 
> > Anyway, I just got it because I'm a vintage E-Mu
> > fanatic...
> > 
> > Greetings,
> > Elm.
> > 
> > 
> 
>
__________________________________________________________
> Be a better friend, newshound, and 
> know-it-all with Yahoo! Mobile. Try it now.
>
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
> 
> 
> 
> 
> 
> 
> 
> ---------------------------------
> Get the name you always wanted with the new y7mail
> email address.
> 
> [Non-text portions of this message have been
> removed]
> 
> 

__________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

[Non-text portions of this message have been removed]

---------------------------------
Get the name you always wanted with the new y7mail email address.

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]


 argin-bottom: 20px; padding: 0 8px; } #ygrp-sponsor .ad{ padding: 8px 0; }
#ygrp-sponsor .ad #hd1{ font-family: Arial; font-weight: bold; color:
#628c2a; font-size: 100%; line-height: 122%; } #ygrp-sponsor .ad a{
text-decoration: none; } #ygrp-sponsor .ad a:hover{ text-decoration:
underline; } #ygrp-sponsor .ad p{ margin: 0; } o{font-size: 0; } .MsoNormal{
margin: 0 0 0 0; } #ygrp-text tt{ font-size: 120%; } blockquote{margin: 0 0
0 4px;} .replbq{margin:4} -->



 
____________________________________________________________________________
________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

[Non-text portions of this message have been removed]


------------------------------------

Yahoo! Groups Links