emulatorII-list

I

On Apr 20, 2008, at 9:42 AM, "Kenneth Abildgaard | OIIO" <kenneth@oiio.dk> wrote:

What�s the ROM version of your Emulator ?

You can see it on the EPROM chip located on the top right side of the
sampler.

The ROM version will look something similar to this 810928.

If it�s an old ROM version it may be unable to read any samples made on
another Emulator � it sounds to me as if this is your problem.

I have the old 810928 version and cannot read floppies made on another
Emulator � but fortunately mine came with 369 floppies. 

But let me know what version it is � and I�ll let you know if this is your
problem.

Kenneth

12bit.com

Fra: emulatorII-list@yahoogroups.com
[mailto:emulatorII-list@yahoogroups.com] P� vegne af Mike de Vries
Sendt: 20. april 2008 16:28
Til: emulatorII-list@yahoogroups.com
Emne: Re: [emulatorII-list] Re: Any Emulator I users in this group?

No Pic attached.. Email me personally.

I'm pretty sure the disks are the same for all models. 2, 4 and 8 voice.

I'll take a snap of the inside of mine and see if that helps.

Regards

Mike

GG <umi4m@... <mailto:umi4m%40yahoo.com> > wrote:
Mike,

Still trying to get this E1 working:). I attached a
pic of what I understood should be the correct disk
drive jumper settings. Is this the same as what you
have? Now the LED comes on and if the drive is empty
it makes a noise like its doing a disk seek.
Unfortunately once I put a disk in the drive nothing
happens, all the LEDs stay lit thats about it. All the
disks that I have/bought are from a 8Voice model. I
bet I need a set of disks specific to the 4Voice.

--- Mike de Vries <mrjdevries@yahoo.com.au
<mailto:mrjdevries%40yahoo.com.au> > wrote:

> How funny, I've just stuck a refurbished Shugart
> 400L in my Emulator1.. so I went through the whole
> jumpers thing.. (I stuck the jumpers off my old
> drive into the old one.)
> 
> This drive cost me $10 and worked perfectly!
> 
> Looking at the drive front on, from the disk entry
> side..
> 
> The IC mount with the jumpers is wired as follows
> 
> Connector SIDE
> 
> ------- this on is also (via a soldered wire)....
> -------
> -------
> -------
> -------
> ------- ....connected to this one!
> -- --
> 
> 
> DISK ENTRY SIDE
> 
> 
> Hope this Helps!
> 
> 
> Mike
> 
> 
> 
> GG <umi4m@... <mailto:umi4m%40yahoo.com> > wrote:
> Elm,
> 
> I had a similar type of encounter back in the early
> 90s, I bought this E1 from a group called Voice
> Farm,
> it came with all their samples:). It stopped working
> one day so I drove it up to EMu systems to no far
> from
> where I live. They put me in contact with Ed R. one
> of
> the original designers and they fixed it no charge! 
> Long story short, I sold that E1 a few years later,
> always regretted it. 
> 
> I just now got a 4 voice, with the disk drive
> removed. I found a replacement drive but lack two
> things:
> 
> 1. The drive mounting bracket. I will have to make
> my
> own and was hoping someone with a E1 could just send
> me a pic of how its mounted that would help me.
> 
> 2. The replacement drive has some jumpers on it and
> I
> was hoping someone with a working E1 could let me
> know
> what jumper settings they have on their drive.
> 
> If I get mine working I could send you a few disks
> if
> you still want them?
> 
> Thanks
> G 
> 
> --- elmbeatz <elmbeatz@... <mailto:elmbeatz%40hotmail.com> >
wrote:
> 
> > I bought mine in '91 without any disks.
> > Back in those days, E-Mu still was a company on
> > their own feet, and
> > they gave me support, as they sent me all software
> > that originally
> > came with the machine ( formatting, multisampling,
> > sequencing,
> > manual.... ). 
> > The thing worked as I tested it, but it worked
> very
> > very buggy. It's
> > an eight voice model. Unfortunately, I seem to
> have
> > lost all my disks
> > for it... 
> > 
> > Anyway, I just got it because I'm a vintage E-Mu
> > fanatic...
> > 
> > Greetings,
> > Elm.
> > 
> > 
> 
>
__________________________________________________________
> Be a better friend, newshound, and 
> know-it-all with Yahoo! Mobile. Try it now.
>
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
> 
> 
> 
> 
> 
> 
> 
> ---------------------------------
> Get the name you always wanted with the new y7mail
> email address.
> 
> [Non-text portions of this message have been
> removed]
> 
> 

__________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

[Non-text portions of this message have been removed]

---------------------------------
Get the name you always wanted with the new y7mail email address.

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]


 argin-bottom: 20px; padding: 0 8px; } #ygrp-sponsor .ad{ padding: 8px 0; } 	#ygrp-sponsor .ad #hd1{ font-family: Arial; font-weight: bold; color: #628c2a; font-size: 100%; line-height: 122%; } #ygrp-sponsor .ad a{ text-decoration: none; } #ygrp-sponsor .ad a:hover{ text-decoration: underline; } #ygrp-sponsor .ad p{ margin: 0; } o{font-size: 0; } .MsoNormal{ margin: 0 0 0 0; } #ygrp-text tt{ font-size: 120%; } blockquote{margin: 0 0 0 4px;} .replbq{margin:4} -->



      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

[Non-text portions of this message have been removed]