emulatorII-list

Mike,

Still trying to get this E1 working:).  I attached a
pic of what I understood should be the correct disk
drive jumper settings.  Is this the same as what you
have?  Now the LED comes on and if the drive is empty
it makes a noise like its doing a disk seek.
Unfortunately once I put a disk in the drive nothing
happens, all the LEDs stay lit thats about it. All the
disks that I have/bought are from a 8Voice model.  I
bet I need a set of disks specific to the 4Voice.





--- Mike de Vries <mrjdevries@...> wrote:

> How funny, I've just stuck a refurbished Shugart
> 400L in my Emulator1.. so I went through the whole
> jumpers thing.. (I stuck the jumpers off my old
> drive into the old one.)
>    
>   This drive cost me $10 and worked perfectly!
>    
>   Looking at the drive front on, from the disk entry
> side..
>    
>   The IC mount with the jumpers is wired as follows
>    
>   Connector SIDE
>    
>   ------- this on is also (via a soldered wire)....
>   -------
>   -------
>   -------
>   -------
>   ------- ....connected to this one!
>   --   --
>   
>  
>   DISK ENTRY SIDE
>    
>    
>   Hope this Helps!
>    
>    
>   Mike
>    
>    
>   
> GG <umi4m@...> wrote:
>           Elm,
> 
> I had a similar type of encounter back in the early
> 90s, I bought this E1 from a group called Voice
> Farm,
> it came with all their samples:). It stopped working
> one day so I drove it up to EMu systems to no far
> from
> where I live. They put me in contact with Ed R. one
> of
> the original designers and they fixed it no charge! 
> Long story short, I sold that E1 a few years later,
> always regretted it. 
> 
> I just now got a 4 voice, with the disk drive
> removed. I found a replacement drive but lack two
> things:
> 
> 1. The drive mounting bracket. I will have to make
> my
> own and was hoping someone with a E1 could just send
> me a pic of how its mounted that would help me.
> 
> 2. The replacement drive has some jumpers on it and
> I
> was hoping someone with a working E1 could let me
> know
> what jumper settings they have on their drive.
> 
> If I get mine working I could send you a few disks
> if
> you still want them?
> 
> Thanks
> G 
> 
> --- elmbeatz <elmbeatz@...> wrote:
> 
> > I bought mine in '91 without any disks.
> > Back in those days, E-Mu still was a company on
> > their own feet, and
> > they gave me support, as they sent me all software
> > that originally
> > came with the machine ( formatting, multisampling,
> > sequencing,
> > manual.... ). 
> > The thing worked as I tested it, but it worked
> very
> > very buggy. It's
> > an eight voice model. Unfortunately, I seem to
> have
> > lost all my disks
> > for it... 
> > 
> > Anyway, I just got it because I'm a vintage E-Mu
> > fanatic...
> > 
> > Greetings,
> > Elm.
> > 
> > 
> 
>
__________________________________________________________
> Be a better friend, newshound, and 
> know-it-all with Yahoo! Mobile. Try it now.
>
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
> 
> 
> 
> 
>                          
> 
>        
> ---------------------------------
> Get the name you always wanted with the new y7mail
> email address.
> 
> [Non-text portions of this message have been
> removed]
> 
> 



      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

[Non-text portions of this message have been removed]