emulatorII-list

Have you checked that MIDI is enabled and set to channel 1 on EII? If you have any MIDI cables attached pull them off from EII, that should do the trick.
   
  /Marko

brian_ronn <brian_ronn@...> skrev:
          Hi fellow EII users

I've installed OS8.0 on a PowerPC 4400/200 and I have tried to make 
the PowerPC communicate with the EII. Unfortunately without any luck.

I've tried with apletalk active for the printer and modem and in the 
inactive mode. Disk cache is permanently on, ram disk on and off and 
virtuel memory on and off too without success.

I have a PowerMac 7500/100 with OS 8.0 which communicate well with 
the EII with the same cable. The PowerMac is working with ApleTalk 
active, disk cache on, virtuel memory on and ram disk on but this 
doesn't seem to work with the PowerPC.

According to emulatorarchive the PowerPC should work too, but how. 
Does any of you know how?

Best regards

Brian
Denmark 



                         

       
---------------------------------
Ta semester! - sök efter resor hos Yahoo! Shopping. 
Jämför pris på flygbiljetter och hotellrum: http://shopping.yahoo.se/c-169901-resor-biljetter.html

[Non-text portions of this message have been removed]