This indeed looks like a memory problem. The error message shows that 4 memory chips cause problems. These are IC52, IC53, IC54 and IC57 on the main digital board (under the additional memory board). It's a little bit strange that 4 chips on the same board row are damaged... One of the known problems of the EII is ICs making bad contact/loose ICs. Perhaps you can first push slightly on all memory ICs on the main board to make sure they are connected well... ///E-Synthesist --- In emulatorII-list@yahoogroups.com, "roisto" <roisto@...> wrote: > > hello, > > i just got emuII(6018,dualfloppy,rev1), it wont load any other > floppies than boot disk and memory test. i ran memory test with > message: error at 2282C data: 73 s/b: 01 when trying load bank from > floppy, machine freezes at the message "this may take a while", well > i have waited hours.. so i think it´s a little bit relative here. > > i also cannot sample more than 2 secs, the message "sample is > good" (which makes me smile eveytime) appears and machine suddenly > freezes. then i tried to make a bank with under 2 sec sample and it > seems to save and load just great. > > it looks pretty clear to me i have to replace broken memory chip (s).. > or is there something else i have not figured out yet? > > thanks > > - t >
Message
Re: bad memory?
2007-12-14 by esynthesist
Attachments
- No local attachments were found for this message.