emulatorII-list

Hey Doug............
Thanks for taking the time to send the advice.  I'll
let you know what happens.
Dave

> --- In emulatorII-list@yahoogroups.com, David Dehart
> <mytunes@...> 
> wrote:
> >
> > Hey Doug.............
> > My Emulator Darwin has an output jack with the
> outter
> > sleeve broken off as well.
> > Do you have a suggestion on a replacement part ?
> > I'm OK with removing and soldering in the new
> part,
> > but am clueless on what and where to get
> > replacements.............
> > Thanks everyone for the discussions.  Although I'm
> not
> > really vocal in the discussions, I read and learn
> from
> > them all.
> > Thanks again.
> > Dave 
> >
> 
> Hi Dave,  First contact would be EMU as this type
> jack is used on 
> the E4xt as well.  Next would be DigiKey, they are
> helpful and had 
> what I needed for the EII.  An interim fix would be
> to just go to 
> radio shack and get a standard 1/4" female and
> fasten to case, run 
> the wires to existing connector, not familiar with
> the Darwin layout,
> but you would be up and running in the meantime. 
> When my out jack 
> on the EII was accidentally broken I took one of the
> 8 independent 
> out jacks off and used it until I got replacements. 
> If you are 
> unable to find one, let me know and I will do some
> digging.  Doug 
> 
>