emulatorII-list

--- In emulatorII-list@yahoogroups.com, David Dehart <mytunes@...> 
wrote:
>
> Hey Doug.............
> My Emulator Darwin has an output jack with the outter
> sleeve broken off as well.
> Do you have a suggestion on a replacement part ?
> I'm OK with removing and soldering in the new part,
> but am clueless on what and where to get
> replacements.............
> Thanks everyone for the discussions.  Although I'm not
> really vocal in the discussions, I read and learn from
> them all.
> Thanks again.
> Dave 
>

Hi Dave,  First contact would be EMU as this type jack is used on 
the E4xt as well.  Next would be DigiKey, they are helpful and had 
what I needed for the EII.  An interim fix would be to just go to 
radio shack and get a standard 1/4" female and fasten to case, run 
the wires to existing connector, not familiar with the Darwin layout,
but you would be up and running in the meantime.  When my out jack 
on the EII was accidentally broken I took one of the 8 independent 
out jacks off and used it until I got replacements.  If you are 
unable to find one, let me know and I will do some digging.  Doug