emulatorII-list

Just wanted to follow up about the White EL foil.

I did, in fact, have a faulty inverter. I had another
one laying around and now and the glow is great,
although it looks quite blue when connected to the
stock E-mu inverter. Reads 89V AC, don't have a scope
so not sure about frequency. cheers, [w]


--- Doug Berg <caddyfam@...> wrote:

> --- In emulatorII-list@yahoogroups.com, Wayne
> Griffin 
> <ingsoc_1979@...> wrote:
> >
> >
> > 
> > Thanks for taking the time to reply to me in
> detail. I
> > guess my inverter must not be working. I
> constructed
> > and connected my EL exactly the way that you
> described
> > (laminated / directly connected) I suppose my
> inverter
> > is dying. I wasn't aware that you could test inv's
> > with no load, I thought it was bad for them- no?
> [w]
> > 
> > 
> >        
> >Re:  Try TELESIS or DigiKey as I believe they sell
> inverters but 
> you will have to improvise wiring as it will not fit
> into pc board 
> taps.  Just silicon seal to board where old one was
> and run wires 
> from board to new inverter. Check your schematics
> for inverter in 
> voltage.  Doug  
>
_____________________________________________________________________
> _______________Yahoo! oneSearch: Finally, mobile
> search 
> > that gives answers, not web links. 
> >
>
http://mobile.yahoo.com/mobileweb/onesearch?refer=1ONXIC
> >
> 
> 
> 



       
____________________________________________________________________________________Yahoo! oneSearch: Finally, mobile search 
that gives answers, not web links. 
http://mobile.yahoo.com/mobileweb/onesearch?refer=1ONXIC