emulatorII-list

Hello Chris,

thanx for your answer. DS0 doesn`t work. I think it must be DS2. The 
most drives just have DS0 and DS1. Two of the drives, which I have 
found In my basement have the possibility to jumper DS2 - one of 
them via jumper-plug the other via soldering iron. On both drives 
the LED lit up when I jumper DS2. But the formating process doesn`t 
start. If I will start formating, both drives-LED lit up and the 
display says, that the drive is not ready.

Best regards
Heiko



--- In emulatorII-list@yahoogroups.com, "Chris Strellis" 
<synthasy2000@...> wrote:
>
> 
> > The main-problem on most of the drives is, that you could not 
jumper 
> > the drive to the necessary adress. 
> 
> Look over the PCB of the floppy drive.  Sometimes you will see a
> surface mounted link for DS1 (drive select 1) and DS0 (drive select
> 0).  They maybe appear as two half-moon shaped pads. Desolder any 
DS1
> link and bridge the DS0 with solder/wire.  See if this works.
> 
> I don't have an Emu II but I have resurrected a Roland S330 that 
way.
> 
> Cheers
> 
> Chris
> 
> http://www.strellis.com
>