> The main-problem on most of the drives is, that you could not jumper > the drive to the necessary adress. Look over the PCB of the floppy drive. Sometimes you will see a surface mounted link for DS1 (drive select 1) and DS0 (drive select 0). They maybe appear as two half-moon shaped pads. Desolder any DS1 link and bridge the DS0 with solder/wire. See if this works. I don't have an Emu II but I have resurrected a Roland S330 that way. Cheers Chris http://www.strellis.com
Message
Re: Disk-Drive
2007-03-13 by Chris Strellis