Elektron Musical Instruments

Hello!

Running PC with Cubase 4 here. Apart from the TM-1, I have a Midex8 and a 
Midisport 2x2 (only for keeping the NordModular editor trafic off the 
Midex8...).

After a cold boot/restart of my computer, the C6 utility will more often 
than not select the wrong midi port, so I usually have to configure that 
again, and restart the C6 utility for it to work. That doesn't seem to 
happen when I use the Midex8 for connectiong to the MD.

Cubase, on the other hand seem to be able to keep track of which interface 
is the TM-1. However, sometimes during start of Cubase, or during playback, 
cubase just freezes, until I unplug the TM-1, then everything goes straight 
back to normal (happends both during startup, shutdown and sometimes during 
playback in Cubase 4, and during startup in SX3).

Also, with TM-1, having cubase running and using C6 at the same time doesn't 
work (since the windows driver doesn't allow multiple apps to use the same 
port simultaneously). This works just fine with the Midex8.

All in all, I have just decided to disconnect the TM-1, and go back to 
having the MD connected to the Midex8. The very quick dumps adn sample loads 
were great, but all in all, with the problems I'm having, it's not worth 
it...

Anybody else with similar setups experiencing similar problems?

Regards

/Patrik

why not use the "reset midi devices" within the midi tab in cubase..save you
unplugging the tm-1..I am the same with you about ditching the TM-1, as mine
has became unrecognisable and works from time to time..
On 29/10/06, rydan <rydan@...> wrote:
>
>   Hello!
>
> Running PC with Cubase 4 here. Apart from the TM-1, I have a Midex8 and a
> Midisport 2x2 (only for keeping the NordModular editor trafic off the
> Midex8...).
>
> After a cold boot/restart of my computer, the C6 utility will more often
> than not select the wrong midi port, so I usually have to configure that
> again, and restart the C6 utility for it to work. That doesn't seem to
> happen when I use the Midex8 for connectiong to the MD.
>
> Cubase, on the other hand seem to be able to keep track of which interface
>
> is the TM-1. However, sometimes during start of Cubase, or during
> playback,
> cubase just freezes, until I unplug the TM-1, then everything goes
> straight
> back to normal (happends both during startup, shutdown and sometimes
> during
> playback in Cubase 4, and during startup in SX3).
>
> Also, with TM-1, having cubase running and using C6 at the same time
> doesn't
> work (since the windows driver doesn't allow multiple apps to use the same
>
> port simultaneously). This works just fine with the Midex8.
>
> All in all, I have just decided to disconnect the TM-1, and go back to
> having the MD connected to the Midex8. The very quick dumps adn sample
> loads
> were great, but all in all, with the problems I'm having, it's not worth
> it...
>
> Anybody else with similar setups experiencing similar problems?
>
> Regards
>
> /Patrik
>
>  
>



-- 
M


[Non-text portions of this message have been removed]

Can't use reset. Cubase doesn't just stop, it freezes the entire 
computer, completely, until I unplug the TM-1...

/Patrik

Mark skrev:

> 
> 
> why not use the "reset midi devices" within the midi tab in cubase..save you
> unplugging the tm-1..I am the same with you about ditching the TM-1, as mine
> has became unrecognisable and works from time to time..
> On 29/10/06, rydan <rydan@... <mailto:rydan%40cutpaste.org>> wrote:
>  >
>  > Hello!
>  >
>  > Running PC with Cubase 4 here. Apart from the TM-1, I have a Midex8 and a
>  > Midisport 2x2 (only for keeping the NordModular editor trafic off the
>  > Midex8...).
>  >
>  > After a cold boot/restart of my computer, the C6 utility will more often
>  > than not select the wrong midi port, so I usually have to configure that
>  > again, and restart the C6 utility for it to work. That doesn't seem to
>  > happen when I use the Midex8 for connectiong to the MD.
>  >
>  > Cubase, on the other hand seem to be able to keep track of which 
> interface
>  >
>  > is the TM-1. However, sometimes during start of Cubase, or during
>  > playback,
>  > cubase just freezes, until I unplug the TM-1, then everything goes
>  > straight
>  > back to normal (happends both during startup, shutdown and sometimes
>  > during
>  > playback in Cubase 4, and during startup in SX3).
>  >
>  > Also, with TM-1, having cubase running and using C6 at the same time
>  > doesn't
>  > work (since the windows driver doesn't allow multiple apps to use the 
> same
>  >
>  > port simultaneously). This works just fine with the Midex8.
>  >
>  > All in all, I have just decided to disconnect the TM-1, and go back to
>  > having the MD connected to the Midex8. The very quick dumps adn sample
>  > loads
>  > were great, but all in all, with the problems I'm having, it's not worth
>  > it...
>  >
>  > Anybody else with similar setups experiencing similar problems?
>  >
>  > Regards
>  >
>  > /Patrik
>  >
>  >
>  >
> 
> -- 
> M
> 
> [Non-text portions of this message have been removed]
> 
>

Hi everybody,
I've read that people using Cubase together with a TM-1 are 
experiencing problems (freeze)... well, I'm a Nuendo 3 user and I have 
the same problem. I wrote to Elektron support but could not get any 
answer. The strange thing is that it has worked well a few times, but 
not anymore...

Exactly the same with me, but i was using live..mine stopped going to turbo
mode,stopped working too, then was preventing my computer to boot...

On 01/11/06, sdumor <sdumor@...> wrote:
>
>   Hi everybody,
> I've read that people using Cubase together with a TM-1 are
> experiencing problems (freeze)... well, I'm a Nuendo 3 user and I have
> the same problem. I wrote to Elektron support but could not get any
> answer. The strange thing is that it has worked well a few times, but
> not anymore...
>
>  
>



-- 
M


[Non-text portions of this message have been removed]

Are there other people having troubles with their brand new TM-1 round 
there? (Freezed Sequencer/PC)

Mine's working fine with Live 6, no issues at all.

On 11/6/06, sdumor <sdumor@...> wrote:
> Are there other people having troubles with their brand new TM-1 round
> there? (Freezed Sequencer/PC)
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>


-- 
Tarekith
http://www.tarekith.com