so similar to using BankSelect and Program Change in combination when accessing sounds in a synth with more than 128 programs? As an option, it would be good to have, but it's not going to decrease the amount of MIDI data than the current implementation because if you've recorded data for 10 controllers, you're going to have data for 10 controllers in either configuration. Also, if it's like using BankSelect, you'll always have a delay before the controller switching between synth/fx/routing makes the switch which may cause some difficulty. I dunno, I'm not a MIDI guru ... Anthony J. Justman Legal Strategies Group 5905 Christie Avenue Emeryville, CA 94608-1925 Tel: (510) 450-9600 Fax: (510) 450-9601 email: ajj@... This message contains information which may be confidential and privileged. Unless you are the addressee (or authorized to receive for the addressee), you may not use, copy or disclose to anyone the message or any information contained in the message. If you have received the message in error, please advise the sender by reply e-mail ajj@..., and delete the message. Thank you very much. >>> ripe@... 06/03/02 03:00PM >>>
Message
Re: [elektron] Re: recording MD to a sequencer.
2002-06-03 by Anthony Justman