i've taken both md and mnm's apart before. do not use a screwdriver to pry the knobs off. its tempting, as they're on there very tightly. but you can do it with just your fingers. just pinch it with your thumb and first finger and wedge your fingers against the face plate to apply pressure there while pulling upwards. it'll take a minute, but they'll come up. the main thing is to pull straight up. do not put any sideways pressure on or you'll snap the encoder and you'll have to send the whole unit in to replace it. anyway, it can be done and it's not that bad but you just need to be careful. good luck! On Aug 20, 2007, at 7:24 AM, Goktug Citci wrote: > Hi, > > I had the same problem, I fixed it myself with email help of elektron > support. > > First you have to remove the knobs gently, then remove the plastic > cover, > and using two sided stickers, glue the plastic cover again. > > Be VERY careful, if you cannot remove a knob, dont force it, > otherwise that > knob cannot be repaired.. > > I highly suggest you to send to elektron support..or be very very > careful > about what you are doin J > > Bests > > Goktug. [Non-text portions of this message have been removed]
Message
Re: [elektron] MnM - plastic covering is coming off
2007-08-20 by Joseph Melnyk
Attachments
- No local attachments were found for this message.