Yahoo Groups archive

Elektron Musical Instruments

Index last updated: 2026-04-28 23:22 UTC

Message

Re: Monomachine, SIN Clipping

2007-05-06 by dayjob111

my experience as been that the MM will clip when using all 6 parts routed to stereo 
outputs as if there's just too much for it to sum. as if it just can't crunch the numbers or 
something.. but when routed to individual outs i can push the volume as high as i need.

It really depends on the sound though.  sometimes basses are harder to deal with.

--- In elektron-users@yahoogroups.com, Niall Munnelly <aleph@...> wrote:
>
> Hi,
> 
> At what mix level and volume does a SIN machine clip for
> you?
> 
> With the mixer volume one the sixth line and the track
> volume at 76, some clipping's audible.  Distortion is
> considerably more noticable, and nastier, at higher values
> {even, say, 78}.
> 
> I'd like to know if this is typical behavior.  It's peaking
> at about -15 on my audio interface, so I know it's in the
> Mono's internal bus.
> 
> -- 
> Yours,
> Niall.
> .. .  .   .    .     .       .           .             .                 .
> Aleph Null.                             A Simple Insinuation Around Silence.
> http://aleph-null.net
> .. .. gpg public key - http://aleph-null.net/niall.gpg .. ..
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.