Dotcomformat

Of course, one could get even less invasive by:
- making sure th estandoffs were set up to hot the Doepfer holes (it
looks like these are)
- making a very small PCB with the 2 regulators for converting to +/-
12 from the +/- 15 in the dot com supply (although, some modules
would work OK at +/- 15 without modification.  This might be one.
- even plugging 3.5 mm jacks into the Doepfer board and wiring them
to the front panel.

We would be happy to do screens panels for this.  Start making a wish
list.  We are about ready to get the panels rolling (finally).  I
know, I am way behind.

Larry

--- Markk Roberts <moog960seq@yahoo.com> wrote:

> Just like this Chuck, only with a .com panel...  BTW I
> AM ordering a run of .com panels from Larry for the
> A156 two panels at this time. So if you want in tell
> Larry you want some panels...
> 
> here's some pictures...
> 
> http://www.cyndustries.com/eurodapter.cfm
> 
> 
> Markk :-)
> 
> 
> --- vogelscheiss <vogelscheiss@vogelscheiss.com>
> wrote:
> > Fantastic.  Any time you feel like telling any of
> > the specifics of how it's
> > done, especially with any photos, I'd be burning up
> > with curiosity.  This is
> > something I was talking about with Larry Hendry a
> > couple of years ago.  (I
> > went to the extent of designing up a bunch of
> > panels, and then got a
> > combination of frightened of ruining the modules'
> > value and way too busy.)
> > 
> > --Chuck
> > 
> > > -----Original Message-----
> > > From: dotcomformat@yahoogroups.com
> > > [mailto:dotcomformat@yahoogroups.com]On Behalf Of
> > Markk Roberts
> > > Sent: Monday, May 23, 2005 6:08 PM
> > > To: dotcomformat@yahoogroups.com
> > > Subject: RE: [dotcomformat] doepfer clockdivider
> > in dotcom format
> > >
> > >
> > > They are called "standoffs" and that's how I am
> > > mounting my A156 Dual Quantizer also, but I have a
> > > third board as well, which has the Cyndustries
> > > converter powerboard which does all the work of
> > making
> > > the Doepfer connection to the .com seamless.
> > >
> > > leaving the Doepfer module for the most part
> > "intact."
> > >
> > > Markk
> > >
> > >
> > > --- unknown freak <vogelscheiss@vogelscheiss.com>
> > > wrote:
> > > > Oliver, I find this picture kind of fascinating:
> > > >
> > > >
> > >
> >
> http://photos.groups.yahoo.com/group/dotcomformat/vwp?.dir=/oliver
> > > &.dnm=cloc
> > > >
> > >
> >
> kdivcap.jpg&.src=gr&.done=http%3a//photos.groups.yahoo.com/group/d
> > > otcomforma
> > > >
> > >
> >
> t/vwp%3f.dir=/oliver%26.dnm=Clockdivider%2bFrontpanel.jpg%26.src=gr
> > > >
> > > > It looks like you were able to simply mount the
> > > > Doepfer module to the back
> > > > of the .com panel with some kind of (what are
> > those
> > > > called, "setbacks"?
> > > > "spacers"?) in kind of a minimally-invasive way,
> > > > while wiring up somehow to
> > > > the jack contacts without removing them.  I'd
> > love
> > > > to have a larger
> > > > resolution version of this image to squint at,
> > as
> > > > well as to hear any
> > > > details about how you went about it.  This is a
> > type
> > > > of job I've been
> > > > thinking about for years.
> > > >
> > > > --Chuck
> > > >
> > > >
> > > > -----Original Message-----
> > > > From: dotcomformat@yahoogroups.com
> > > > [mailto:dotcomformat@yahoogroups.com] On
> > > > Behalf Of Oliver
> > > > Sent: Monday, May 23, 2005 2:14 PM
> > > > To: dotcomformat@yahoogroups.com
> > > > Subject: [dotcomformat] doepfer clockdivider in
> > > > dotcom format
> > > >
> > > > a little bit silent in this group...
> > > >
> > > > i added three new pictures in my folder (oliver)
> > of
> > > > the photo section:
> > > >
> > >
> >
> http://photos.groups.yahoo.com/group/dotcomformat/lst?.dir=/
> > > >
> > >
> >
> oliver&.src=gr&.order=&.view=t&.done=http%3a//briefcase.yahoo.com/
> > > >
> > > > i (ok - with a little help from my technical
> > more
> > > > experienced dad) just
> > > > finished a doepfer
> > > > a160 clockdivider module in a single space
> > dotcom
> > > > blank panel. we changed
> > > > the original
> > > > small led's to the standard dotcom leds
> > (requires
> > > > more power - thats why we
> > > > had to
> > > > change some resistors).
> > > > the 15v from the dotcom power supply were
> > converted
> > > > to 12v of the doepfer
> > > > board.
> > > > and yes, it works.
> > > >
> > > > oliver
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Yahoo! Groups Links
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > > __________________________________________________
> > > Do You Yahoo!?
> > > Tired of spam?  Yahoo! Mail has the best spam
> > protection around
> > > http://mail.yahoo.com
> > >
> > >
> > >
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > 
> > 
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around 
> http://mail.yahoo.com 
> 
> 
> ------------------------ Yahoo! Groups Sponsor
> --------------------~--> 
> In low income neighborhoods, 84% do not own computers.
> At Network for Good, help bridge the Digital Divide!
> http://us.click.yahoo.com/c9hWNA/3MnJAA/n1hLAA/QnLolB/TM
>
--------------------------------------------------------------------~->
> 
> 
>  
> Yahoo! Groups Links
> 
> 
> 
>  
> 
> 
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com