Yahoo Groups archive

Disklavier

Index last updated: 2026-04-28 23:20 UTC

Message

Re: [disklavier] unknown RCA jacks on DKC-850

2012-06-03 by athomik

As the DKC850 is physically (electronically) the same as the DKC800 used on the Diskklavier E3, there are connections for key & pedal drive functions. These connectors are for control information only, not audio or MIDI and are not used on anything other then the E3 series.

athomik

On Jun 3 2012, MarkGMID wrote:

>RCA jacks are usually used to connect speakers.
>
>On 6/2/2012 8:36 PM, kassey22000 wrote:
>>
>> Does anyone happen to know what the 2 RCA jacks (Blue and Green) next
>> to the cable connector on the back of the DKC850 are used for? Manual
>> and support website don't seem to have any references. I'm looking for
>> another potential audio-output option and hope these are extra audio
>> out jacks.
>> Thanks in advance.
>>
>>
>
>

Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.