Disklavier

Tony,

I am using Emagic Logic Audio Platinum. (along with Sonar 2 and Cubase VST)
I have never used Emagic's MicroLogic but if it is anything like Logic Audio
Platinum it can be a beast to set up and get running properly inside Logic's
'environment' setup. This is how you tell the sequencer what MIDI interface
you are using and where all your devices (MX100A disklavier is your case)
are interfaced physically to your Mac. It is done graphically on the screen
but it can be very difficult to comprehend the first time around...

Does MicroLogic use a similar 'interface' to Platinum's 'environment'? If it
does, email me privately and I'll see what I can do to help you out.

I am running aPC under Windows XP but the Logic 'environment' setup is the
same for the Mac...


Danny


----- Original Message -----
From: <PianoBench@...>
To: <disklavier@yahoogroups.com>
Sent: Thursday, May 09, 2002 9:55 PM
Subject: Re: [disklavier] emagic micrologic - help!


> Good evening, Tony.
>
> << thanks for the advice. I thought I'd email you directly since you were
> kind
> enough to try to help me. I guess I should elaborate on my set-up a bit as
> my situation is a bit unusual.>>
>
> I am happy to try to help.
>
> <<I have a MX100A disklavier-no tone generator and only two midi out
> settings-delay out/keyboard out. The midiman USB device has three lights
> that indicate 1. USB activity, 2. Midi In activity (signal from piano) and
> 3. Midi out activity (signal from Macintosh).