Disklavier

The original one in there was (supposed to be) slo-blow.

Bill
Love God. Love People. Make a difference.


On Sep 6, 2015, at 3:13 PM, Jeff Joseph josephaud@... [disklavier] <disklavier@yahoogroups.com> wrote:

Hi Bill,


I only use fast blow

I’ll try your troubleshooting method. 

thanks

Jeff

> On Sep 6, 2015, at 6:09 PM, Bill Brandom bill.brandom03@gmail.com [disklavier] <disklavier@yahoogroups.com> wrote:
> 
> 
> A couple of things:
> 
> - are you replacing the 7 amp fuse with a Slo-Blow type fuse?
> 
> - You may have a bad solenoid. Make a recording playing each key 20 times  very loudly, and play every key. Then play it back and see if a particular key blows the fuse. If so, then the problem will be either the solenoid or the driver board it is attached to.
> 
> Bill
> Love God. Love People. Make a difference.
> 
> 
> On Sep 6, 2015, at 2:02 PM, Jeff Joseph josephaud@aol.com [disklavier] <disklavier@yahoogroups.com> wrote:
> 
>  
> I spoke too soon, It has the US & Canada Power Supply too.  But the piano is playing at the moment. I wonder if there’s some pedal action or code in MIDI files I’ve downloaded that draw extra current from the piano? 
> 
> 
> Jeff
> 
>> On Sep 6, 2015, at 12:18 PM, Jeff Joseph josephaud@...m [disklavier] <disklavier@yahoogroups.com> wrote:
>> 
>> that’s perfect! Thanks Jeff
>> 
>> (and yes, the power supply looks identical, though the MX100B manual is for the West German electricity)
>> 
>>> On Sep 6, 2015, at 11:44 AM, Bill Brandom billbrando@... [disklavier] <disklavier@yahoogroups.com> wrote:
>>> 
>>> 
>>> Sorry about that. I am also sending the MX100B Service Manual. Power supplies should've the same, it seems that the B Information goes into more depth.
>>> 
>>> MX100A Service Manual:
>>> https://www.dropbox.com/s/3i4g5ycciqq82v6/mx100a%20sm8549.pdf?dl=0
>>> 
>>> MX100B Service Manual:
>>> https://www.dropbox.com/s/45sjj6afv2vp53a/mx100b%20sm8556.pdf?dl=0
>>> 
>>> Bill Brandom
>>> 
>>> On Sep 6, 2015, at 8:24 AM, Jeff Joseph josephaud@... [disklavier] <disklavier@yahoogroups.com> wrote:
>>> 
>>>  
>>> Thanks Bill, but the attached file is the Owner’s Manual and Midi Handbook. I need the service manual to find out what voltages should be within the power supply of the MX100A.
>>> 
>>> 
>>> Jeff
>>> 
>>>> On Sep 6, 2015, at 11:04 AM, Bill Brandom bill.brandom03@gmail.com [disklavier] <disklavier@yahoogroups.com> wrote:
>>>> 
>>>> 
>>>> Jeff, 
>>>> 
>>>> Here is a link to the MX100A Service Manual:
>>>> 
>>>> https://www.dropbox.com/sh/a9f1dp2awyftzmq/AACeefJwktpnGoxK_2BgJKfPa?dl=0
>>>> 
>>>> Bill Brandom
>>>> 
>>>> 
>>>> On Sep 6, 2015, at 7:46 AM, Jeff Joseph josephaud@... [disklavier] <disklavier@yahoogroups.com> wrote:
>>>> 
>>>>  
>>>> Thought I’d try again in case someone has a link to the service manual for the MX100A
>>>> 
>>>> 
>>>> Jeff
>>>> 
>>>>> Begin forwarded message:
>>>>> 
>>>>> From: "Jeff Joseph josephaud@... [disklavier]" <disklavier@yahoogroups.com>
>>>>> Subject: [disklavier] MX100A [1 Attachment]
>>>>> Date: September 3, 2015 at 9:02:28 AM EDT
>>>>> To: disklavier@yahoogroups.com
>>>>> Reply-To: disklavier@yahoogroups.com
>>>>> 
>>>>> [Attachment(s) from Jeff Joseph included below]
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> Hi,
>>>>> 
>>>>> My power supply has been blowing its 7A fuse with increasing regularity.
>>>>> 
>>>>> Does anyone have a service manual or schematic for this early disklavier?
>>>>> 
>>>>> Any suggestions on what might cause the current draw to go up? 
>>>>> 
>>>>> Here's a picture of my power supply 
>>>>> 
>>>>> Jeff
>>>>> Sent from my Apple Newton