Yahoo Groups archive

Disklavier

Index last updated: 2026-04-28 23:20 UTC

Message

Re: [disklavier] mx100a problems and questions/suggestions

2014-03-12 by Skanter123

That makes sense, George - thanks!

Sam 
www.keyboardcollective.com
(212) 684-3304





> On Mar 12, 2014, at 8:32 AM, George Frederick Litterst <PianoBench@...> wrote:
> 
> Good morning, everyone.
> 
> 
>> On Mar 11, 2014, at 8:48 PM, Sam Kanter wrote:
>> 
>> I will have to do some testing to see how much compression my piano is recording. I suppose a good test would be doing a record playback test with a MIDI monitor. I assume I could fix some of the compression using one of Spence's volume utilities?
> 
> Sam, your vintage Disklavier does not compress the MIDI data by making and saving changes to the MIDI file. It simply doesn't play the highest velocity notes as loud as a modern Disklavier and it doesn't play lowest velocity notes as softly as a modern Disklavier does.
> 
> Using a program to alter the MIDI data--making the high velocity notes even higher and the low velocity notes even lower--will have no effect on playback on your instrument.
> 
> You will find, however, that your vintage Disklavier does record the velocities correctly and that a sequence with a wide dynamic range, recorded on your Disklavier, will play black with that same wide dynamic range on a modern instrument.
> 
> Regards,
> PianoBench
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.