Rhodes Chroma Polaris

--- In chromapolaris@yahoogroups.com, "David Clarke" <ac151@...> wrote:
>
> > ... I have a Polaris that has seemingly seized
> >  up completely?  Basically it powers on with about
> > half the leds remaining lit...
> 
> Following up to the responses of others, this can also occur because of 
> the 'reset level' adjustment ("DC OK Threshhold") on the power supply 
> being incorrect.
> 
> Specifically, it could be a little low, causing the CPU to wake up 
> before it should. If this is the source of the problem, then it is 
> something easy to address (and is covered in the Service Manual, ref: 
> Section 6 - Adjustments and Checkout) [The service manual is available 
> in PDF form at
> http://www.rhodeschroma.com/?id=polaris ]
>
Excellent News!  Problem had been fixed and quite easily I must add
thanks to the recommendation provided above.
This was indeed exactly the issue.  I simply had to perform a minor
adjustment to the R17 pot.  Thank you all very much for the insight
and advice.