Rhodes Chroma Polaris

I have found out some additional info about the pot. I still do not 
have one however and this is proving to be a hard to get part.
as of April 20, 2007 I removed the bad pot to do some research,
it is a 10K pot Fender part#301003201 - 10K 435E printed on side
made by Alps - similar parts are still available and the exact part 
could be made in mimimum lots of 5000.
45mm long
30mm travel
10K linear
20mm tab with 10mm indent at top 5mm wide at bottom 4 mm wide at top
part # RS30111A???? where ???? are tab type and mounting options a 
stock product seems to be RS30111AJ01R. Any ideas as to someone that 
might stock the original Fender Part?

Lou


--- In chromapolaris@yahoogroups.com, "pterodactylrecords" <lou@...> 
wrote:
>
> Can someone provide me with a part number and supplier for the 10K 
ohm 
> R2 slide pot used on the Left Control Board (there is a number 
435E on 
> the side of it).
>