Rhodes Chroma Polaris

> ... I have all the channels open, I'm still trying
> to figure out how to assign the polaris patches to
> different midi channels through the sequencer.
>
> I'm using an Alesis MMt8 sequencer...

I'm not an MMT8 user; however, from what a friend (www.travinomusic.com) 
tells me I think you should be able to do it without problem.

The MMT-8 is 'dumb' in that it can't actually create the patch changes for 
you, but it should be able to dutifully record anything you send it (except 
poly pressure and note-off velocity I think).

Each MMT-8 track is able to record on a separate midi channel, with its own 
program change, etc by default (unless you assign the MIDI filter to ask it 
to ignore certain data).

So - that should mean all you have to do is to have something first which 
can transmit on the different channels, and then record that data (along 
with any patch-change information) directly into a track on the MMT-8.

The Polaris is able to transmit on the base channel, so by changing the base 
channel between recordings, you can have the Polaris send MIDI data on 
channel 1, 2, 3, etc.

Extending the earlier example, that should mean:

Set up MMT-8 to record on Track 1
Set up Polaris to transmit on Channel 1 (Lower Function - K, 1 on 2-6 off)
Start MMT-8 recording
Select the desired patch on the Polaris
Play desired part on the Polaris
Stop Recording MMT-8

Set up MMT-8 to record on Track 2
Set up Polaris to transmit on Channel 2 (Lower Function - K, 2 on, 1, 3-6 
off)
Start MMT-8 recording
Select the desired patch on the Polaris
Play desired part on the Polaris
Stop Recording MMT-8

Set up MMT-8 to record on Track 3
Set up Polaris to transmit on Channel 3 (Lower Function - K, 3 on, 1&2, 4-6 
off)
Start MMT-8 recording
Select the desired patch on the Polaris
Play desired part on the Polaris
Stop Recording MMT-8
...

Continue this process until you've recorded the tracks you're interested 
in - with the MIDI channel data you're interested in.

Now - when you play back the 6 tracks (with the 6 channels of MIDI data), 
you should be able to have the Polaris responding to them.