Rhodes Chroma Polaris

Woah!  Thanks a million!  I just fixed the little bugger using this
info!  You are the king of the world
!!!
Christopher


--- In chromapolaris@yahoogroups.com, David Clarke <ac151@f...> wrote:
>
> Glad to hear that things seem to be behaving better.
> 
> > ... Ummm...  I do not have adobe Acrobat reader, can
> > anyone download the pdf files in jpg format or word
> > even?
> 
> The Adobe reader is a free download (and isn't that large), so in
the long
> term it would be a good thing to get.
> 
> The whole manual is 50+ pages - but the data is good to have. 
Specifically, 
> the info in the "Adjustments and Checkout" section are certainly
good to 
> have.
> 
> With regard to the DC OK setting, here's the two para.'s that deal with 
> that:
> 
> ===================
> 
> DC OK THRESHOLD:
> ---------------
> 
> The factory setting for the DC OK threshold requires the use of a
rather 
> elaborate test circuit; however, it is sufficient in the field to
simply 
> back off on R17 to minimum (full CCW), then turn it clockwise until
LED CR10 
> lights.  The nominal DC level out at DC OK (P3 pin 1, brown wire) is
+3V.
> 
> Late serial numbers use a different secondary board with a moidified
DC OK 
> circuit.  ON these no adjustment is necessary or provided.  The
nomimal DC 
> level out at DC OK (P34 pin 1, brown wire) is +5V.
> 
> ===================
> 
> 
> David Clarke
>