> From: newavboy@... > > I'm burning new Eproms, because I have no idea if the old > ones are good still, I suppose I can read them, they say > theyre version 9...worth powering up with them first? If I > change them to the same OS chips (4 2764), do I need to do a > calibration routine? Also with the new RAM chips? If you've got new EPROMs, use them. Whenever you change the OS, you have to do the full calibration procedure. And even if you change RAM chips, you have to do it with the batteries disconnected, so you have to do the full calibration procedure then too. > I'm still missing the noise generator IC< ok to power up without it? Sure. You just won't get any noise. > Anything to look for? Voltages are checked and correct... That's all you need. Try the auto-tune, and see if it succeeds or fails. There are things that could cause all channels to fail, but if some or all succeed then the instrument is probably in good shape. Then do the calibration. -- Ciao, Paul D. DeRocco Paul mailto:pderocco@...
Message
RE: [chromapolaris] Getting close!
2017-04-09 by Paul D. DeRocco