On Sunday, September 7, 2014, 'David Clarke' ac151@... [chromapolaris] <chromapolaris@yahoogroups.com> wrote:> What I need is for the keyboard/controllers to route to MIDI out,
> and the MIDI IN routed to the sound engine.
> Basically I want it to behave like a more modern keyboard in LOCAL
> OFF.
>
> The manual is not the clearest thing I've come across when it's
> describing the function of the MIDI interface switch assignments.
For what you describe, it appears that you effectively want to turn
'local control' of the Polaris off.
Assuming your 'MIDI out' and 'MIDI in' are otherwise OK and you just
want to essentially turn 'local off'.
The main area of interest will be the settings achieved from "Lower
Function, Interface". Specifically, turn off:
Lower Function, Interface, 1 (Main Local control)
Lower Function, Interface, 2 (Link Local control)
Lower Function, Interface, 3 (Sequencer Local control)
David Clarke
Message
Re: [chromapolaris] MIDI issues
2014-09-07 by Bob Stewart
Hi David
Pretty sure I had that setting, and it wasn't working. I'll check it again tomorrow if I get a chance.
That's all three LEDs off ya? 1,2, and 3
What about the status of the others... 4-12? Just in case they have a bearing on the overall function.
Thanks for your help.
Bob