CGS 07
2018-01-31 by Mike Burnham
My CGS 07 gate sequencer which has been working so well for a decade has suddenly become faulty
Its as if all outputs are stuck in full position
would that be a faulty 4081 in the output buffers?
Thread
CGS 07
Re: CGS 07
2018-01-31 by Mike Burnham
It is triggering on both positive and negative going edges of pulse or square from Utility LFO and just negative of some other clocks
From: cgs_synth@yahoogroups.com <cgs_synth@yahoogroups.com> on behalf of Mike Burnham mikejburnham@... [cgs_synth] <cgs_synth@yahoogroups.com>
Sent: 31 January 2018 14:07:15
To: cgs_synth@yahoogroups.com
Subject: [cgs_synth] CGS 07
Sent: 31 January 2018 14:07:15
To: cgs_synth@yahoogroups.com
Subject: [cgs_synth] CGS 07
My CGS 07 gate sequencer which has been working so well for a decade has suddenly become faulty
Its as if all outputs are stuck in full position
would that be a faulty 4081 in the output buffers?
Re: CGS 07
2018-01-31 by Mike Burnham
Fixed!
In stead of a lm358 I had put a tl072 for clock input.
I changed it to a lm358 and it works perfectly
I never noticed an opamp changing spec over time but it seems to have changed. Weird!
All good in the hood!
On 31 Jan 2018, at 16:26, Mike Burnham mikejburnham@... [cgs_synth] <cgs_synth@yahoogroups.com> wrote:
Show quoted textHide quoted text
It is triggering on both positive and negative going edges of pulse or square from Utility LFO and just negative of some other clocks
From: cgs_synth@yahoogroups.com <cgs_synth@yahoogroups.com> on behalf of Mike Burnham mikejburnham@... [cgs_synth] <cgs_synth@yahoogroups.com>
Sent: 31 January 2018 14:07:15
To: cgs_synth@yahoogroups.com
Subject: [cgs_synth] CGS 07My CGS 07 gate sequencer which has been working so well for a decade has suddenly become faulty
Its as if all outputs are stuck in full position
would that be a faulty 4081 in the output buffers?
Re: CGS 07
2018-01-31 by Ken Stone
Odd! Well, I'm glad you got it going again.
Cheers,Show quoted textHide quoted text
On Thu, Feb 1, 2018 at 4:15 AM, Mike Burnham mikejburnham@... [cgs_synth] <cgs_synth@yahoogroups.com> wrote:
Fixed!In stead of a lm358 I had put a tl072 for clock input.I changed it to a lm358 and it works perfectlyI never noticed an opamp changing spec over time but it seems to have changed. Weird!All good in the hood!
On 31 Jan 2018, at 16:26, Mike Burnham mikejburnham@... [cgs_synth] <cgs_synth@yahoogroups.com> wrote:
It is triggering on both positive and negative going edges of pulse or square from Utility LFO and just negative of some other clocks
From: cgs_synth@yahoogroups.com <cgs_synth@yahoogroups.com> on behalf of Mike Burnham mikejburnham@... [cgs_synth] <cgs_synth@yahoogroups.com>
Sent: 31 January 2018 14:07:15
To: cgs_synth@yahoogroups.com
Subject: [cgs_synth] CGS 07My CGS 07 gate sequencer which has been working so well for a decade has suddenly become faulty
Its as if all outputs are stuck in full position
would that be a faulty 4081 in the output buffers?
--