Yahoo Groups archive

Cgs synth

Index last updated: 2026-04-28 23:16 UTC

Thread

CGS66 PSU and 5V adapter

Re: CGS66 PSU and 5V adapter

2015-10-30 by Ken Stone

I see no reason why the adapters would not work, other than if the total current drawn is more than the supply can handle. Keep an eye on the +VE regulator's heatsink.
Show quoted textHide quoted text
On Fri, Oct 30, 2015 at 4:47 AM, soon.wazoo@... [cgs_synth] <cgs_synth@yahoogroups.com> wrote:

Hi guys! I'm using this board Ken Stone's Modular Synthesizer with an eurorack system; I'm about to throw in a couple digital modules which use the 5V filament: would adapters like Mutable Instruments' Volt and Doepfer 100AD5+5 work with it?

Ken Stone's Modular Synthesizer
Descriptions of the various modules in a home built music synthesizer.
Preview by Yahoo




--
Ken Stone otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>

Re: CGS66 PSU and 5V adapter

2015-10-30 by soon.wazoo

Thanks Ken! The question came out because I couldn't actually figure out how those adapters work, for it wasn't 100% clear whether they originated 5V by themselves or activated a pre-existing 5V filament as on Doepfer power rails: turns out the latter was false. :-(

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.