Cgs synth

I have a Bridechamber panel for this build which has a .38" hole and a .25" hole drilled at the "RESET" labelled region.

See... http://bridechamber.com/C_Master_Div.html

What is the RESET function on the panel supposed to be? Is it a jack and LED or push button and LED? Either way I'm sort of confused about how to wire either in.

If it is a Jack and LED, should the jack tip to be routed in series through the led to ground? Sounds hazardous for the LED.

If it is a push button and LED, should the two be in parallel? There is only one wire terminal at the PCB for this function.

It seems the simple stuff gets you every time.

Totally confused...

>What is the RESET function on the panel supposed to be? Is it a jack and

LED or push button and LED? Either way I'm sort of confused about how to
wire either in.

Jack and Pushbutton.

I'd connect the wirefrom the PCB to the jack tip, and the jack tip via a 1k
to the push button. The other side of the push button goes to +VE

Ken

_______________________________________________________________________
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>

Muchos Gracias Amigo!

--- In cgs_synth@yahoogroups.com, sasami@... wrote:
>
>
> >What is the RESET function on the panel supposed to be? Is it a jack and
> LED or push button and LED? Either way I'm sort of confused about how to
> wire either in.
>
> Jack and Pushbutton.
>
> I'd connect the wirefrom the PCB to the jack tip, and the jack tip via a 1k
> to the push button. The other side of the push button goes to +VE
>
> Ken
>
> _______________________________________________________________________
> Ken Stone sasami@... otherunicorn@...
> Modular Synth PCBs for sale <http://www.cgs.synth.net/>
> Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
>