Cgs synth

>Hi Im about to start building my serge filter, debating if i need the

>
>also im using the version 1.1 board and just want to make sure that the

>
>thanx
>
>
>
>------------------------------------
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>Yahoo! Groups Links
>
>
>
>

On Tue, Feb 15, 2011 at 4:29 PM, <sasami@...> wrote:

>
>
> "Possible use for the buffers include buffering the input and CV input to
> compensate for their lower-than-usual input impedance, or buffering the
> outputs after they have been fed though a level pot, as per the panel in
> the
> photo."
>
> If that doesn't sound like something you need, then you don't need them.
>
> Version 1.1 is the current version of the PCB with correct FET orientation.
>
> Ken
>
>
> >Hi Im about to start building my serge filter, debating if i need the
> buffer section. it will be added into my motm based rig.
> >
> >also im using the version 1.1 board and just want to make sure that the
> j201's dont need to be reversed. pretty sure its for the version 1.0 but i
> fig better safe than sorry..
> >
> >thanx
> >
> >
> >
> >------------------------------------
>
> >
> >The CGS Modular Synth home page: http://www.cgs.synth.net/
> >Yahoo! Groups Links
> >
> >
> >
> >
> __________________________________________________________
> Ken Stone sasami@... otherunicorn@...
> Modular Synth PCBs for sale <http://www.cgs.synth.net/>
> Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
>
>
>



--
________________
rico loverde
415.596.6255
ricoloverde.com


[Non-text portions of this message have been removed]