Yahoo Groups archive

Cgs synth

Index last updated: 2026-04-28 23:16 UTC

Thread

Wave Multiplier +/-12v

Wave Multiplier +/-12v

2010-08-11 by tacolee412

Hello everyone,

First attempt at a CGS module. I want to build the Wave Multiplier to run in Eurorack. Does anyone have one running at +/-12v? If so are there any recommended changes I should make to any component values?

Thanks,

Luke

Re: Wave Multiplier +/-12v

2010-08-11 by sasami@hotkey.net.au

I assume you mean the CGS29 wave Multiplier. It will run on +/- 12V with no
problems.
If yoi find the output levels are a little low, try changing resistors LPOL
to 1k5, FOL to 3k9 and LHL to 270k.
Ken
Show quoted textHide quoted text
>Hello everyone,
>
>First attempt at a CGS module. I want to build the Wave Multiplier to run
in Eurorack. Does anyone have one running at +/-12v? If so are there any
recommended changes I should make to any component values?
>
>Thanks,
>
>Luke
>
>
>
>
>------------------------------------
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>Yahoo! Groups Links
>
>
>
>
_______________________________________________________________________
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.