CGS67 Active Real Ring Modulator error
2010-04-08 by sasami@hotkey.net.au
The pad labeled "0V" on the REV0.0 and VER1.0 versions of the CGS67 is
actually connected to the -VE rail. You will need to connect to 0V elsewhere
on the board. The pad in question was previously shown as the common 0V
connection in the wiring diagram, so why no one has never reported it to me
I will never know.
The web page has been updated.
Ken
_______________________________________________________________________
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
actually connected to the -VE rail. You will need to connect to 0V elsewhere
on the board. The pad in question was previously shown as the common 0V
connection in the wiring diagram, so why no one has never reported it to me
I will never know.
The web page has been updated.
Ken
_______________________________________________________________________
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>