4-channel gate sequencer cgs07 problem
2010-01-13 by loop
apologies if this has been addressed here but i could not find it.
i have a 4-channel gate sequencer with a problem i want to hunt down again.
whenever three or more channels are active on one stage, the gate sequencer skips the following step. example:
loop mode
chan 1,2,3 active (up) on stage 2
=stage 3 is skipped
this results in a 7-step sequence. this is true for stages 1-7.
any combination of three channels on one stage results in this behavior.
any help is appreciated. thanks!
i have a 4-channel gate sequencer with a problem i want to hunt down again.
whenever three or more channels are active on one stage, the gate sequencer skips the following step. example:
loop mode
chan 1,2,3 active (up) on stage 2
=stage 3 is skipped
this results in a 7-step sequence. this is true for stages 1-7.
any combination of three channels on one stage results in this behavior.
any help is appreciated. thanks!